MaizePrepCHEM 130
Exam 3 · Ch 9

Heat, specific heat & calorimetry

Heat (q) flows from hot to cold until everything reaches one temperature.

19 min

Heat (q) flows from hot to cold until everything reaches one temperature. The amount of heat a sample absorbs depends on its mass, its specific heat capacity and its temperature change: q = m·c·ΔT. Calorimetry is just bookkeeping: heat lost by one thing = heat gained by another.

q = m · c · ΔTΔT = T_final − T_initial (sign matters)
q_lost + q_gained = 0thermal equilibrium: m₁c₁(T_f − T₁) + m₂c₂(T_f − T₂) = 0
q_rxn = −q_solutioncoffee cup (constant P) → ΔH
q_rxn = −C_cal · ΔTbomb (constant V) → ΔE; C_cal in kJ/°C
ΔH_rxn = q_rxn / nkJ per mole of the reactant asked about

Signs: system vs surroundings

  • Endothermic (ΔH > 0): the system absorbs heat, so the surroundings (water, solution) get colder. Dissolving NH₄NO₃ is the classic example.
  • Exothermic (ΔH < 0): the system releases heat and the surroundings get warmer — combustion, neutralization, precipitation.
  • “How much energy is required to heat…” → q is positive for the sample, so heating is endothermic for the sample.

Coffee-cup method

  1. Mass of solution = mass of water + mass of solute, or total volume × density (1.00 g/mL when told).
  2. q_solution = m c ΔT, using the solution’s c (4.18 or 4.2 J/g°C — use what they give).
  3. q_rxn = −q_solution. Temperature dropped? q_rxn is positive (endothermic).
  4. Divide by moles (of the limiting reactant) and convert J → kJ.

Heating curves (phase changes)

On a heating curve, temperature stays flat during a phase change — the energy goes into breaking intermolecular forces. Each sloped segment is m·c·ΔT with that phase’s c; each flat segment is n·ΔH_fus or n·ΔH_vap.

Worked example · ethanol 20.0 → 90.0 °C same structure as WN26 Q8

Ethanol boils at 78.4 °C, so there are three steps: warm the liquid, boil it, warm the gas. (c_liquid 2.46, c_gas 1.33 J/g°C, ΔH_vap 42.3 kJ/mol.)

① 40.0 g × 2.46 J/g°C × (78.4 − 20.0) = 5747 J = 5.747 kJ
② (40.0 / 46.07) mol × 42.3 kJ/mol = 36.73 kJ
③ 40.0 g × 1.33 J/g°C × (90.0 − 78.4) = 617.1 J = 0.617 kJ

Total = 43.1 kJ. Notice the vaporization step is ~85% of the heat — and the J vs kJ trap.

Worked example · tea and milk same structure as WN26 Q6

30.0 g tea (4.15 J/g°C, 60.0 °C) + 20.0 g milk (3.85 J/g°C, 5.0 °C).

T_f = (30.0·4.15·60.0 + 20.0·3.85·5.0) ÷ (30.0·4.15 + 20.0·3.85) = (7470 + 385) ÷ 201.5 = 39.0 °C — closer to the tea’s temperature because it has the larger heat capacity (m × c).

TRY IT

Calorimetry solver (4 modes)

TRY IT

Heating-curve calculator

Common traps
  • Mixing J and kJ when adding heating-curve steps.
  • Forgetting the negative sign: q_rxn = −q_solution.
  • Using only the water’s mass when the problem says to use the solution (water + solute or combined volumes).
  • Bomb calorimeters use C_cal (kJ/°C) — no mass, no c.

Practice

1
Like SU25 Q1 · Heat, specific heat & calorimetry
How much heat is needed to warm 150. g of silver (c = 0.235 J/g·°C) from 22.0 °C to 85.5 °C? (3 sig figs)
Math shortcuts are on for CHEM 130. Type ^ then digits for powers, _ then digits for subscripts.J
2
Like WN26 Q6, FA25 Q5 · Heat, specific heat & calorimetry
A 40.0 g piece of iron (c = 0.449 J/g·°C) at 95.0 °C is dropped into 100.0 g of water (c = 4.184 J/g·°C) at 22.0 °C. Final temperature? (3 sig figs)
Math shortcuts are on for CHEM 130. Type ^ then digits for powers, _ then digits for subscripts.°C
3
Like SU25 Q11 · Heat, specific heat & calorimetry
Dissolving 4.25 g of NH₄Cl (53.49 g/mol) in 100.0 g of water in a coffee-cup calorimeter lowers the temperature from 22.5 °C to 19.6 °C. Using the total solution mass and c = 4.18 J/g·°C, what is ΔH for dissolving NH₄Cl? (2 sig figs, kJ/mol)
Math shortcuts are on for CHEM 130. Type ^ then digits for powers, _ then digits for subscripts.kJ/mol
4
Like WN26 Q7 · Heat, specific heat & calorimetry
Burning 1.50 g of glucose (180.16 g/mol) in a bomb calorimeter (C_cal = 10.2 kJ/°C) raises the temperature by 2.28 °C. Energy of combustion in kJ/mol? (3 sig figs)
Math shortcuts are on for CHEM 130. Type ^ then digits for powers, _ then digits for subscripts.kJ/mol
5
Like WN26 Q8, FA25 Q9 · Heat, specific heat & calorimetry
How much heat converts 25.0 g of ice at −10.0 °C into liquid water at 30.0 °C? c(ice) = 2.09, c(water) = 4.184 J/g·°C; ΔH_fus = 6.01 kJ/mol. (3 sig figs, kJ)
Math shortcuts are on for CHEM 130. Type ^ then digits for powers, _ then digits for subscripts.kJ
6
Concept · Heat, specific heat & calorimetry
When NH₄NO₃ dissolves in water, the solution gets colder. Which statements are true? Select all.

MaizePrep is an independent study resource. It is not affiliated with, sponsored by, or endorsed by the University of Michigan. Course names and numbers are used only to describe which class the material covers. Every practice question is original, written in the style of the course.